Single-Partition Disk In Linux

If the data disk capacity is greater than 2 TiB, see section Expanding the Partition of a 2TiB Disk.

If the host has partitioned only one partition and uses the xfs/ext3/4 file system, you can use the following methods to expand the instance.

Note It is recommended that you do not partition the udisk on the uhost, so as not to affect the expansion of the udisk.

Before expanding the capacity of the disk, we recommend that you back up the data if there is data in the data disk.

Udisks can be expanded only when they are Available status. Since you need to unmount the udisk, your business will be interrupted, so please be cautious.

Instructions

In this example, the fdisk command is used as an example, and the parted command cannot be used intersecting with the fdisk command. In this example, the udisk mount point is /dev/vdb. If you do not see the device, check the disk mount information and status.

Tips

• View the current mount status, file system type, and partition status.

  Note: The lsblk command results show that there is only one partition in the VDB, and can be expanded according to the scheme described in this document. In other case, please see the partition expansion documentation.

• To unmount the udisk from the operating system and console, see Unmount UDisk. Use the console Disk Management tab to expand the udisk.

• After expanding the udisk, mount the udisk to uhost Mount UDisk. After the mount is complete, check the disk size in the uhost.

• use fdisk command to delete the original partition and create a new partition.

  Note: Deleting a partition will not cause data loss in the data disk.

• Check the file system and expand the capacity.

  Note: The commands for checking and expanding capacity are different for different file systems, so please check the type of your file system and follow the corresponding steps.

  ext4 file system

  • execute e2fsck -f /dev/vdb1 command to check the file system
  • execute resize2fs /dev/vdb1 command to expand

    e2fsck -f /dev/vdb1
    resize2fs /dev/vdb1
    
  • execute mount command to mount the disk

    mount /dev/vdb1 /data
    

  xfs file system

  • execute xfs_repair /dev/vdb1 command to check file system

    xfs_repair /dev/vdb1
    
  • execute mount to mount udisk

    mount /dev/vdb1 /data
    
  • execute xfs_growfs to expand

    xfs_growfs /data