Initialize Network Configuration
- Go to the UReach product page from the UCloud Global console, find the device that needs to be configured on the Intelligent Gateway Management page, and click on the details to enter the details page.
- Initialize the configuration for WAN, LAN, and Wi-Fi from the details page.
- Configure the WAN network. Click the “OK” button to save the configuration after it is complete.
| Field Name | Field Instructions |
|---|---|
| Device WAN Port | Select physical WAN port |
| MTU | Maximum Transportation Unit, range is [512,1500] |
| Access Mode | The way to access the cloud network |
| Connection Type | The way the WAN port accesses the network |
| SNAT | UCPE LAN’s internal network address can be transformed into a public network address when turned on |
- Configure the LAN network. Click the “OK” button to save the configuration after it is finish.
| Field Name | Field Instructions |
|---|---|
| MTU | Maximum Transportation Unit, range is [512,1500] |
| LAN Gateway Configuration | The LAN port network configuration of the UCPE gateway, effective on all UCPE LAN ports |
| DHCP-Server | Once turned on, downstream devices of UCPE can obtain IP addresses dynamically through the DHCP protocol |
| DHCP Address Pool | The IP address pool intended to be allocated to downstream devices of UCPE by DHCP, the range of this address pool should be in the same segment as the LAN gateway configuration |
| Address Lease | The expiration time of the IP address assigned to a specific device by DHCP. If the lease is not renewed after this time, a new IP address needs to be re-assigned |
- Configure the Wi-Fi network. Click the “OK” button to save the configuration after completion.