Docs
udns
Product Introduction
Configuration Instructions

Configuration Instructions

It is recommended to turn off the nscd and systemd-resolved processes in the background to avoid UDNS resolution failures.

When using the UDNS product, you need to change the default DNS of the UHost host to the following configuration.

100.90.90.90
100.90.90.100

The configuration of North China 1 is used as an example below to introduce how to modify DNS under different operating systems.

CentOS (including CentOS6/7/8)

  1. Modify /etc/resolv.conf:
sudo vim /etc/resolv.conf

Change it to the following content:

nameserver 100.90.90.90
nameserver 100.90.90.100

Save and exit, and it will take effect immediately.

  1. Persist it. View the configuration file of the current network card /etc/sysconfig/network-scripts/ifcfg-eth0
sudo vim /etc/sysconfig/network-scripts/ifcfg-eth0

The content may be as follows:

BOOTPROTO=none
DEFROUTE=yes
DEVICE=eth0
DNS1=10.23.255.1
DNS2=10.23.255.2
DNS3=114.114.114.114
GATEWAY=172.16.0.33
HWADDR=52:54:00:ab:98:0b
IPADDR=172.16.0.45
MTU=1454
NETMASK=255.255.255.240
NM_CONTROLLED=no
ONBOOT=yes
STARTMODE=auto
TYPE=Ethernet
USERCTL=no

Modify the DNS related configuration as follows:

DNS1=100.90.90.100
DNS2=100.90.90.90

Save and exit.

Ubuntu (including 14.04/16.04/18.04)

1, Modify the current /etc/resolv.conf configuration file:

sudo vim /etc/resolv.conf

Change to:

nameserver 100.90.90.90
nameserver 100.90.90.100

The DNS configuration can take effect immediately.

  1. Persist, view the network card configuration file, as follows:

Non-cloud init startup management

sudo vim /etc/network/interfaces

Its content may be as follows:

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 172.16.0.35
netmask 255.255.255.240
gateway 172.16.0.33
mtu 1454
dns-nameservers 10.23.255.1 10.23.255.2 114.114.114.114

Modify the dns-nameservers line to:

dns-nameservers 100.90.90.90 100.90.90.100 114.114.114.114

And exit save.

Use cloud init for startup management

sudo vim /etc/network/interfaces.d/50-cloud-init.cfg

Its content may be as follows:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
    address 192.168.1.248/26
    dns-nameservers 10.23.255.1 10.23.255.2 114.114.114.114
    gateway 192.168.1.193
    mtu 1454

Modify the dns-nameservers line to:

dns-nameservers 100.90.90.90 100.90.90.100 114.114.114.114

And exit save.

Windows (including 2008/2012/2016)

  1. Right-click start, select network connections.
  1. Right-click Ethernet, select Properties.
  1. Select Internet Protocol Version4(TCP/IPv4), and modify Preferred DNS server and Alternnate DNS server:
  1. Click OK, the modification is successful.

Debian (including 8/9/10)

1, Modify the current /etc/resolv.conf configuration file:

sudo vi /etc/resolv.conf

Change to:

nameserver 100.90.90.90
nameserver 100.90.90.100

The DNS configuration can take effect immediately.

  1. Persist, view the network card configuration file, as follows:

Non-cloud init startup management

sudo vi /etc/network/interfaces

Its content may be as follows:

auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 172.16.0.35
netmask 255.255.255.240
gateway 172.16.0.33
mtu 1454
dns-nameservers 10.23.255.1 10.23.255.2 114.114.114.114

Modify the dns-nameservers line to:

dns-nameservers 100.90.90.90 100.90.90.100 114.114.114.114

And exit save.

Use cloud init for startup management

sudo vi /etc/network/interfaces.d/50-cloud-init

Its content may be as follows:

auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
    address 192.168.1.248/26
    dns-nameservers 10.23.255.1 10.23.255.2 114.114.114.114
    gateway 192.168.1.193
    mtu 1454

Modify the dns-nameservers line to:

dns-nameservers 100.90.90.90 100.90.90.100 114.114.114.114

And exit save.

Redhat 6.X

  1. Modify /etc/resolv.conf :
sudo vim /etc/resolv.conf

Change it to the following content:

nameserver 100.90.90.90
nameserver 100.90.90.100

Save and exit, and it will take effect immediately.

  1. Persist. Check the configuration file of the current network card /etc/sysconfig/network-scripts/ifcfg-eth0
sudo vim /etc/sysconfig/network-scripts/ifcfg-eth0

Content may be as follows:

BOOTPROTO=none
DEFROUTE=yes
DEVICE=eth0
DNS1=10.23.255.1
DNS2=10.23.255.2
DNS3=114.114.114.114
GATEWAY=172.16.0.33
HWADDR=52:54:00:ab:98:0b
IPADDR=172.16.0.45
MTU=1454
NETMASK=255.255.255.240
NM_CONTROLLED=no
ONBOOT=yes
STARTMODE=auto
TYPE=Ethernet
USERCTL=no

Modify the DNS related configuration as follows:

DNS1=100.90.90.100
DNS2=100.90.90.90

Save and exit.

Usage LimitsProduct Pricing