Create ACL Rules - CreateNetworkAclEntry

Overview

Create ACL Rules

Definition

Public Parameters

Parameter Name	Type	Description Information	Required
Action	string	Corresponding API command name, the current API is `CreateNetworkAclEntry`.	Yes
PublicKey	string	The user's public key can be obtained from Console (opens in a new tab)	Yes
Signature	string	User signature generated based on public key and API command, see Signature Algorithm	Yes

Request Parameters

Parameter Name	Type	Description Information	Required
Region	string	Region. See List of Regions and Availability Zones	Yes
ProjectId	string	Project ID. If not filled in, the default project is used, and the sub-account must be filled in. Please refer to the GetProjectList interface.	No
AclId	string	ACL's ID	Yes
Priority	int	The priority of the Entry, for the same Direction, cannot be repeated.	Yes
Direction	string	Outbound or Inbound ("Ingress", "Egress")	Yes
IpProtocol	string	Protocol Rule Description	Yes
CidrBlock	string	CIDR representation of IPv4 segment	Yes
PortRange	string	Targeted Port Range	Yes
EntryAction	string	Behavior of the rule ("Accept", "Reject")	Yes
Description	string	Description. The length limit is no more than 32 bytes.	No
TargetType	int	Application target type. 0 represents 'all resources within the subnet', 1 represents 'specified resources within the subnet', default is 0.	No
TargetResourceIds.N	string	Application target resource list. It is effective for all resources by default. This value does not need to be filled when TargetType is 0.	No

Response Field

Field Name	Type	Description Information	Required
RetCode	int	Return status code. If it is 0, it means successful return. If it is not 0, it means failure.	Yes
Action	string	Operation command name.	Yes
Message	string	Returns an error message, providing detailed description when `RetCode` is non-zero.	No
EntryId	string	ID of the created Entry	Yes

Example

Request Example

https://api.ucloud-global.com/?Action=CreateNetworkAclEntry
&Region=cn-bj
&AclId=netacl-xxxxxx
&ProjectId=org-xxxxx
&Priority=1000
&Direction=Ingress
&IpProtocol=TCP
&CidrBlock=0.0.0.0/0
&PortRange=1-65535
&EntryAction=Accept
&TargetType=2
&TargetResourceIds.n=uhost-xxxxxx
&Description=LpTJGGVz

Response Example

{
  "Action": "CreateNetworkAclEntryResponse",
  "EntryId": "netaclentry_xxxxxx",
  "RetCode": 0
}

CreateNetworkAclAssociation CreateNetworkInterface