Operation Steps
- Log in to the UCloud Global console https://console.ucloud-global.com/
- Navigate to the UWAN product page and click on CPE Smart Gateway, then find the CPE device you wish to configure and click on Configuration Management.
- In the CPE network configuration, both the WAN port and the LAN port need to be configured, click on the “Edit Configuration” button respectively to configure.
- Carry out the WAN port network configuration. After the configuration is complete, click the “Confirm” button to save the configuration.
| Field Name | Field Description |
|---|---|
| Device WAN | Select the physical WAN port |
| MTU | Maximum Transport Unit, range [512,1500] |
| Access Mode | The mode of accessing the cloud network |
| Connection Type | The way the WAN port accesses the network |
| SNAT | If enabled, the intranet address of the CPE local network can be converted to the public network address |
- Carry out the LAN port network configuration, after the configuration is complete, click on the “Confirm” button to save the configuration.
| Field Name | Field Description |
|---|---|
| MTU | Maximum Transport Unit, range [512,1500] |
| LAN Side Gateway Configuration | VLAN network configuration of the UCPE gateway, effective for all UCPE LAN ports |
| DHCP Server | If enabled, downstream devices of UCPE can dynamically obtain IP addresses through the DHCP protocol |
| DHCP Address Pool | The IP address pool expected to be allocated by DHCP for downstream devices of UCPE, the range of this address pool should be in the same segment as the LAN side gateway configuration |
| Address Lease | The expiration time of the IP address allocated by DHCP for a certain device, if not renewed after this time, it needs to reassign the IP address |